Network Working Group                                       F. Ellermann
Request for Comments: 5538                                         xyzzy
Obsoletes: 1738                                               April 2009
Category: Standards Track

                   The 'news' and 'nntp' URI Schemes

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents in effect on the date of
   publication of this document (http://trustee.ietf.org/license-info).
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Abstract

   This memo specifies the 'news' and 'nntp' Uniform Resource Identifier
   (URI) schemes that were originally defined in RFC 1738.  The purpose
   of this document is to allow RFC 1738 to be made obsolete while
   keeping the information about these schemes on the Standards Track.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
   2.  Background . . . . . . . . . . . . . . . . . . . . . . . . . .  2
     2.1.  'nntp' URIs  . . . . . . . . . . . . . . . . . . . . . . .  2
     2.2.  'news' URIs  . . . . . . . . . . . . . . . . . . . . . . .  3
     2.3.  Query Parts, Fragments, and Normalization  . . . . . . . .  3
   3.  Syntax of 'nntp' URIs  . . . . . . . . . . . . . . . . . . . .  4
   4.  Syntax of 'news' URIs  . . . . . . . . . . . . . . . . . . . .  5
   5.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . .  7
   6.  Internationalization Considerations  . . . . . . . . . . . . .  8
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . .  8
   8.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  9
     8.1.  'snews' URIs . . . . . . . . . . . . . . . . . . . . . . .  9
     8.2.  'news-message-ID' Access Type  . . . . . . . . . . . . . . 10
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 10
     9.1.  Normative References . . . . . . . . . . . . . . . . . . . 10
     9.2.  Informative References . . . . . . . . . . . . . . . . . . 11
   Appendix A.  Collected ABNF  . . . . . . . . . . . . . . . . . . . 12
   Appendix B.  Detailed Example  . . . . . . . . . . . . . . . . . . 14

1.  Introduction

   The first definition for many URI schemes appears in [RFC1738].  This
   memo extracts the 'news' and 'nntp' URI schemes from it to allow that
   material to remain on the Standards Track if [RFC1738] is moved to
   "historic" status.  It belongs to a series of similar documents like
   [RFC4156], [RFC4157], [RFC4248], and [RFC4266], which are discussed
   on the <mailto:uri@w3.org> list.

   The definitions for the 'news' and 'nntp' URI schemes given here are
   updates from [RFC1738] based on modern usage of these schemes.  This
   memo intentionally limits its description of the 'news' URI scheme to
   essential features supposed to work with "any browser" and Network
   News Transfer Protocol (NNTP) server.

   [RFC3986] specifies how to define schemes for URIs; it also explains
   the term "Uniform Resource Locator" (URL).  The Network News Transfer
   Protocol (NNTP) is specified in [RFC3977].  The Netnews Article
   Format is defined in [RFC5536].

   The key word "MUST" in this memo is to be interpreted as described in
   [RFC2119].  UTF-8 is specified in [RFC3629].  The syntax uses the
   ABNF defined in [RFC5234].

2.  Background

   The 'news' and 'nntp' URI schemes identify resources on an NNTP
   server, individual articles, individual newsgroups, or sets of
   newsgroups.

   User agents like Web browsers supporting these schemes use the NNTP
   protocol to access the corresponding resources.  The details of how
   they do this, e.g., employing a separate or integrated newsreader,
   depend on the implementation.  The default <port> associated with
   NNTP in [RFC3977] is 119.

2.1.  'nntp' URIs

   The 'nntp' URI scheme identifies articles in a newsgroup on a
   specific NNTP server.  In [RFC3986] terminology, this means that
   'nntp' URIs have a non-empty <authority> component; there is no
   default <host> as for the 'file' or 'news' URI schemes.

   Netnews is typically distributed among several news servers, using
   the same newsgroup names but local article numbers.  An article
   available as number 10 in group "example" on server
   "news.example.com" has most likely a different number on any other
   server where the same article is still available.  Users allowed to
   read and post articles on "their" server may not be allowed to access
   articles on an "arbitrary" server specified in an 'nntp' URI.

   For these reasons, the use of the 'nntp' URI scheme is limited, and
   it is less widely supported by user agents than the similar 'news'
   URI scheme.

2.2.  'news' URIs

   The 'news' URI scheme identifies articles by their worldwide unique
   "Message-ID", independent of the server and the newsgroup.
   Newsreaders support access to articles by their "Message-ID", without
   the overhead of a URI scheme.  In simple cases, they do this directly
   as an NNTP client of a default or currently used server as configured
   by the user.  More general user agents use the 'news' URI scheme to
   distinguish "Message-IDs" from similar constructs such as other URI
   schemes in contexts such as a plain text message body.

   The 'news' URI scheme also allows the identification of newsgroups or
   sets of newsgroups independent of a specific server.  For Netnews, a
   group "example" has the same name on any server carrying this group,
   exotic cases involving gateways not withstanding.  To distinguish
   "Message-IDs" and newsgroup names, the 'news' URI scheme relies on
   the "@" between local part (left-hand side) and domain part (right-
   hand side) of "Message-IDs".

   [RFC1738] offered only one wildcard for sets of newsgroups in 'news'
   URIs, a "*" used to refer to "all available newsgroups".  In common
   practice, this was extended to varying degrees by different user
   agents.  An NNTP extension known as <wildmat>, specified in [RFC2980]
   and now part of the base NNTP specification, allows pattern matching
   in the style of the [POSIX] "find" command.  For the purpose of this
   memo, this means that some additional special characters have to be
   allowed in 'news' URIs, some of them percent-encoded as required by
   the overall [RFC3986] URI syntax.  User agents and NNTP servers not
   yet compliant with [RFC3977] do not implement all parts of this new
   feature.

   Another commonly supported addition to the [RFC1738] syntax is the
   optional specification of a server at the beginning of 'news' URIs.
   This optional <authority> component follows the overall [RFC3986]
   syntax, preceded by a double slash "//" and terminated by the next
   slash "/", question mark "?", number sign "#", or the end of the URI.

2.3.  Query Parts, Fragments, and Normalization

   Fragments introduced by a number sign "#" are specified in [RFC3986];
   the semantics is independent of the URI scheme, and the resolution
   depends on the media type.

   This memo doesn't specify a query part introduced by a question mark
   "?" for the 'news' and 'nntp' URI schemes, but some implementations
   are known to use query parts instead of fragments internally to
   address parts of a composite media type [RFC2046] in Multipurpose
   Internet Mail Extensions (MIME).

   There are no special "." or ".." path segments in 'news' and 'nntp'
   URLs.  Please note that "." and ".." are not valid <newsgroup-name>s.

   URI producers have to percent-encode some characters as specified
   below (Section 4); otherwise, they MUST treat a "Message-ID" without
   angle brackets for 'news' URLs as is, i.e., case-sensitive,
   preserving quoted pairs and quoted strings.

3.  Syntax of 'nntp' URIs

   An 'nntp' URI identifies an article by its number in a given
   newsgroup on a specified server, or it identifies the newsgroup
   without article number.

       nntpURL         = "nntp:" server "/" group [ "/" article-number ]
       server          = "//" authority               ; see RFC 3986
       group           = 1*( group-char / pct-encoded )
       article-number  = 1*16DIGIT                    ; see RFC 3977
       group-char      = ALPHA / DIGIT / "-" / "+" / "_" / "."

   In the form with an <article-number>, the URL corresponds roughly to
   the content of an <xref> header field as specified in [RFC5536],
   replacing its more general <article-locator> by the <article-number>
   used with the NNTP.

   A <newsgroup-name> as specified in [RFC5536] consists of dot-
   separated components.  Each component contains one or more letters,
   digits, "-" (hyphen-minus), "+", or "_" (underscore).  These
   characters can be directly used in a segment of a path in an
   [RFC3986] URI; no percent-encoding is necessary.  Example:

       nntp://news.server.example/example.group.this/12345

   A <wildmat-exact> newsgroup name as specified in [RFC3977] allows (in
   theory) any <UTF8-non-ascii> (see Section 6) and most printable
   US-ASCII characters, excluding "!", "*", ",", "?", "[", "\", and "]".
   However, [RFC5536] does not (yet) permit characters outside of
   <group-char> and so, to keep the syntax simple, the additional
   characters are here covered by <pct-encoded> as defined in [RFC3986],
   since most of them have to be percent-encoded anyway (with a few
   exceptions, such as ":", ";", and "~").  Example:

       nntp://wild.server.example/example.group.n%2Fa/12345

   In the form without <article-number>, the URL identifies a single
   group on the specified server.  This is also possible with an
   equivalent 'news' URL, and the latter is better supported by user
   agents.  Example:

       nntp://news.server.example/example.group.this
       news://news.server.example/example.group.this

4.  Syntax of 'news' URIs

   A 'news' URI identifies an article by its unique "Message-ID", or it
   identifies a set of newsgroups.  Additionally, it can specify a
   server; without when the 'news' URI, server is not specified, a configured default server
   for Netnews access is used.

   The syntax shown below explains how to transform a syntactically
   valid <newsgroup-name> or <msg-id-core> as specified in [RFC5536]
   into the corresponding <newsgroups> or <article> part of a 'news'
   URI.  The transformation from a formally valid 'news' URI back to a
   <newsgroup-name> or <msg-id-core> is not guaranteed to be
   syntactically valid.

     newsURL         = "news:" [ server "/" ] ( article / newsgroups )
     article         = mid-left "@" mid-right
     newsgroups      = *( group-char / pct-encoded / "*" )

     mid-left        = 1*( mid-atext / "." ) /      ; <dot-atom-text>
                       ( "%22" mid-quote "%22" )    ; <no-fold-quote>
     mid-quote       = 1*( mid-atext / "." /        ; <mqtext> incl.
                           mid-special /            ; '\"' / "[" / "]"
                           "%5C%22" / "%5B" / "%5D" )

     mid-right       = 1*( mid-atext / "." ) /      ; <dot-atom-text>
                       ( "%5B" mid-literal "%5D" )  ; <no-fold-literal>
     mid-literal     = 1*( mid-atext / "." /        ; <mdtext> incl.
                           mid-special /            ; '"' / "\[" / "\]"
                           "%22" / "%5C%5B" / "%5C%5D" )

     mid-special     = "(" / ")" / "," / ":" / ";" /
                       "%3C" / "%40" / "%5C%5C"     ; "<" / "@" / "\\"

     mid-atext       = ALPHA / DIGIT /              ; RFC 2822 <atext>
                       "!" / "$" / "&" / "'" /      ; allowed sub-delims
                       "*" / "+" / "=" /            ; allowed sub-delims
                       "-" / "_" / "~" /            ; allowed unreserved
                       "%23" / "%25" / "%2F" /      ; "#" / "%" / "/"
                       "%3F" / "%5E" / "%60" /      ; "?" / "^" / "`"
                       "%7B" / "%7C" / "%7D"        ; "{" / "|" / "}"

   The form identifying an <article> corresponds to the <msg-id-core>
   construct in [RFC5536]; it is a "Message-ID" without angle brackets.
   Characters not directly allowed in this part of an [RFC3986] URI have
   to be percent-encoded, minimally anything percent-encoded.  At a minimum, any character that is not in
   <unreserved>,
   no ":" (colon), and doesn't belong in <sub-delims>, or is a colon (":") has to the <sub-delims>. be percent-
   encoded.

   Several details of a canonical <msg-id-core> are omitted here, e.g.,
   leading, adjacent, or trailing dots are not allowed in
   <dot-atom-text>.  The syntax mainly shows which characters MUST be
   percent-encoded in a <mid-left> (local part) or <mid-right> (domain
   part).

   Please note that "%20" (space) and "%3E" (">") are not allowed.  A
   "%5C" (backslash, "\") can only occur in four combinations, as shown
   above.  Examples:

       news://server.example/ab.cd@example.com
       news:%22do..ts%22@example.com
       news:ab.cd@%5B2001:DB8::CD30%5D
   The form identifying <newsgroups> corresponds to the [RFC3977]
   <wildmat-pattern>, a newsgroup name with wildcards "*" and "?".  Any
   "?" has to be percent-encoded as "%3F" in this part of a URI.
   Examples (the first two are equivalent):

       news://news.server.example/*
       news://news.server.example/
       news://wild.server.example/example.group.th%3Fse
       news:example.group.*
       news:example.group.this

   Without wildcards, this form of the URL identifies a single group if
   it is not empty.  User agents would typically try to present an
   overview of the articles available in this group, likely somehow
   limiting this overview to the newest unread articles up to a
   configured maximum.

   With wildcards, user agents could try to list matching group names on
   the specified or default server.  Some user agents support only a
   specific <group> without wildcards, or an optional single "*".

   As noted above (Section 2.2), the presence of an "@" in a 'news' URI
   disambiguates <article> and <newsgroups> for URI consumers.  The new
   <message-id> construct specified in [RFC3977] does not require an
   "@".  Since [RFC0822], the "Message-ID" syntax has been closely
   related to the syntax of mail addresses with an "@" separating left-
   hand side (local part of addresses, unique part of message
   identifiers) and right-hand side (domain part), and this memo sticks
   to the known [RFC1738] practice.

5.  Acknowledgments

   Henry Spencer was the driving force to adopt MIME in Netnews; he
   registered the MIME 'message/external-body' access type
   'news-message-ID', discussed below (Section 8.2), in 1993 for
   [SON-OF-1036].

   "The 'news' URL scheme" [GILMAN], by Alfred S. Gilman (March 1998),
   introduced additions to the original [RFC1738] 'news' URI scheme.
   Some of these ideas are now widely supported and reflected by the
   revised 'news' URI scheme specified here.

   Thanks to Alfred Hoenes, Charles Lindsey, Clive Feather, Chris
   Newman, Ken Murchinson, Kjetil T. Homme, Lars Magne Ingebrigtsen,
   Martin Duerst, Matt Seitz, Nicolas Krebs, Paul Hoffman, Pasi Eronen,
   Roy T. Fielding, Russ Allbery, Stephane Bortzmeyer, and Tom Petch for
   their feedback, contributions, or encouragement.

   Bill Fenner's _xml2rfc validator_ and _ABNF checker_ were a great
   help in the creation of (not only) this memo.  The same goes for
   various great _IETF tools_ written by Henrik Levkowetz.

6.  Internationalization Considerations

   The URI schemes were updated to support percent-encoded UTF-8
   characters in NNTP newsgroup names as specified in [RFC3977] and
   [RFC3987].

   The Netnews Article Format in [RFC5536] does not yet allow UTF-8 in
   <newsgroup-name>s; therefore, well-known Unicode and UTF-8 security
   considerations are not listed below.  For an overview, see [UTR36]
   and [RFC3629].

   The work on Email Address Internationalization (EAI), started in
   [RFC4952], is not expected to change the syntax of a "Message-ID".
   The work on a successor of
   Among the changes from [RFC2822] hopefully ends up with to [RFC5322] was a
   simplified simplification of
   the syntax for both sides of a "Message-ID". <Message-ID>.

7.  Security Considerations

   There are many security considerations for URI schemes discussed in
   [RFC3986].  The NNTP protocol may use passwords in the clear for
   authentication or offer no privacy, both of which are considered
   extremely unsafe in current practice.  Alternatives and further
   security considerations with respect to the NNTP are discussed in
   [RFC4642] and [RFC4643].

   The syntax for the 'news' and 'nntp' URI schemes contains the general
   <authority> construct with an optional <userinfo> defined in
   [RFC3986].  As noted in [RFC3986], the "user:password" form of a
   <userinfo> is deprecated.

   Articles on NNTP servers typically expire after some time.  After
   that time, corresponding 'news' and 'nntp' URLs may not work anymore
   depending on the server.  While a "Message-ID" is supposed to be
   worldwide unique forever, the NNTP protocol does not guarantee this.
   Under various conditions depending on the servers, the same
   "Message-ID" could be used for different articles, and attackers
   could try to distribute malicious content for known 'news' or 'nntp'
   URLs.

   If a URI does not match the generic syntax in [RFC3986], it is
   invalid, and broken URIs can cause havoc.  Compare [RFC5064] for
   similar security considerations.

8.  IANA Considerations

   The IANA registry of URI schemes has been updated to point to this
   memo instead of [RFC1738] for the 'news' and 'nntp' URI schemes.

8.1.  'snews' URIs

   This section contains the [RFC4395] template for the registration of
   the historical 'snews' scheme specified in [GILMAN].

   URI scheme name:   snews

   Status:            historical

   URI scheme syntax: Same as for 'news' (Section 4)

   URI scheme semantics:
                      Syntactically equivalent to 'news', but using NNTP
                      over SSL/TLS (SSL/TLS with security layer is
                      negotiated immediately after establishing the TCP
                      connection) with a default port of 563, registered
                      as "nntps"

   Encoding considerations:
                      Same as for 'news' (Section 6)

   Applications/protocols that use this URI scheme name:
                      For some user agents, 'snews' URLs trigger the use
                      of "nntps" instead of NNTP for their access on
                      Netnews

   Interoperability considerations:
                      This URI scheme was not widely deployed; its
                      further use is deprecated in favor of ordinary
                      'news' URLs in conjunction with NNTP servers
                      supporting [RFC4642]

   Security considerations:
                      See [RFC4642]; the use of a dedicated port for
                      secure variants of a protocol was discouraged in
                      [RFC2595]

   Contact:           <mailto:uri@w3.org> (URI mailing list)

   Change controller: IETF
   References:        RFC 5538, [RFC4642], [GILMAN]

8.2.  'news-message-ID' Access Type

   The MIME 'news-message-ID' access type was erroneously listed as
   subtype.  IANA has removed 'news-message-ID' from the application
   subtype registry, and has added it to the access types registry
   defined in [RFC4289].

   [RFC4289] requires an RFC for the access types registry.  Because
   [SON-OF-1036] was never published as an RFC, the following paragraph
   quotes the relevant definition:

      NOTE: In the specific case where it is desired to essentially make
      another article PART of the current one, e.g., for annotation of
      the other article, MIME's "message/external-body" convention can
      be used to do so without actual inclusion. "news-message-ID" was
      registered as a standard external-body access method, with a
      mandatory NAME parameter giving the message ID and an optional
      SITE parameter suggesting an NNTP site that might have the article
      available (if it is not available locally), by IANA 22 June 1993.

   Please note that 'news' URLs offer a very similar and (today) more
   common way to access articles by their Message-ID; compare [RFC2017].

9.  References

9.1.  Normative References

   [RFC2119]      Bradner, S., "Key words for use in RFCs to Indicate
                  Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3977]      Feather, C., "Network News Transfer Protocol (NNTP)",
                  RFC 3977, October 2006.

   [RFC3986]      Berners-Lee, T., Fielding, R., and L. Masinter,
                  "Uniform Resource Identifier (URI): Generic Syntax",
                  STD 66, RFC 3986, January 2005.

   [RFC5234]      Crocker, D. and P. Overell, "Augmented BNF for Syntax
                  Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [RFC5536]      Lindsey, C., "Netnews Article Format", RFC 5536,
                  April 2009.

9.2.  Informative References

   [GILMAN]       Gilman, A., "The 'news' URL scheme", Work in Progress,
                  March 1998.

   [POSIX]        Institute of Electrical and Electronics Engineers,
                  "The Open Group Base Specifications Issue 6",
                  IEEE Standard 1003.1, 2004 edition.

   [RFC0822]      Crocker, D., "Standard for the format of ARPA Internet
                  text messages", STD 11, RFC 822, August 1982.

   [RFC1738]      Berners-Lee, T., Masinter, L., and M. McCahill,
                  "Uniform Resource Locators (URL)", RFC 1738,
                  December 1994.

   [RFC2017]      Freed, N. and K. Moore, "Definition of the URL MIME
                  External-Body Access-Type", RFC 2017, October 1996.

   [RFC2046]      Freed, N. and N. Borenstein, "Multipurpose Internet
                  Mail Extensions (MIME) Part Two: Media Types",
                  RFC 2046, November 1996.

   [RFC2595]      Newman, C., "Using TLS with IMAP, POP3 and ACAP",
                  RFC 2595, June 1999.

   [RFC2822]      Resnick, P., "Internet Message Format", RFC 2822,
                  April 2001.

   [RFC2980]      Barber, S., "Common NNTP Extensions", RFC 2980,
                  October 2000.

   [RFC3629]      Yergeau, F., "UTF-8, a transformation format of ISO
                  10646", STD 63, RFC 3629, November 2003.

   [RFC3987]      Duerst, M. and M. Suignard, "Internationalized
                  Resource Identifiers (IRIs)", RFC 3987, January 2005.

   [RFC4156]      Hoffman, P., "The wais URI Scheme", RFC 4156,
                  August 2005.

   [RFC4157]      Hoffman, P., "The prospero URI Scheme", RFC 4157,
                  August 2005.

   [RFC4248]      Hoffman, P., "The telnet URI Scheme", RFC 4248,
                  October 2005.

   [RFC4266]      Hoffman, P., "The gopher URI Scheme", RFC 4266,
                  November 2005.

   [RFC4289]      Freed, N. and J. Klensin, "Multipurpose Internet Mail
                  Extensions (MIME) Part Four: Registration Procedures",
                  BCP 13, RFC 4289, December 2005.

   [RFC4395]      Hansen, T., Hardie, T., and L. Masinter, "Guidelines
                  and Registration Procedures for New URI Schemes",
                  BCP 35, RFC 4395, February 2006.

   [RFC4642]      Murchison, K., Vinocur, J., and C. Newman, "Using
                  Transport Layer Security (TLS) with Network News
                  Transfer Protocol (NNTP)", RFC 4642, October 2006.

   [RFC4643]      Vinocur, J. and K. Murchison, "Network News Transfer
                  Protocol (NNTP) Extension for Authentication",
                  RFC 4643, October 2006.

   [RFC4952]      Klensin, J. and Y. Ko, "Overview and Framework for
                  Internationalized Email", RFC 4952, July 2007.

   [RFC5064]      Duerst, M., "The Archived-At Message Header Field",
                  RFC 5064, December 2007.

   [RFC5322]      Resnick, P., Ed., "Internet Message Format", RFC 5322,
                  October 2008.

   [SON-OF-1036]  Spencer, H., "Son of 1036: News Article Format and
                  Transmission", Work in Progress, May 2009.

   [UTR36]        Davis, M. and M. Suignard, "Unicode Security
                  Considerations", Unicode Technical Reports #36,
                  August 2006.

Appendix A.  Collected ABNF

   In addition to the syntax given above, this appendix also lists the
   sources of terms used in comments and the prose:

     nntpURL         = "nntp:" server "/" group [ "/" article-number ]
     server          = "//" authority               ; see RFC 3986
     group           = 1*( group-char / pct-encoded )
     article-number  = 1*16DIGIT                    ; see RFC 3977
     group-char      = ALPHA / DIGIT / "-" / "+" / "_" / "."

     newsURL         = "news:" [ server "/" ] ( article / newsgroups )
     article         = mid-left "@" mid-right
     newsgroups      = *( group-char / pct-encoded / "*" )
     mid-left        = 1*( mid-atext / "." ) /      ; <dot-atom-text>
                       ( "%22" mid-quote "%22" )    ; <no-fold-quote>
     mid-quote       = 1*( mid-atext / "." /        ; <mqtext> incl.
                           mid-special /            ; '\"' / "[" / "]"
                           "%5C%22" / "%5B" / "%5D" )

     mid-right       = 1*( mid-atext / "." ) /      ; <dot-atom-text>
                       ( "%5B" mid-literal "%5D" )  ; <no-fold-literal>
     mid-literal     = 1*( mid-atext / "." /        ; <mdtext> incl.
                           mid-special /            ; '"' / "\[" / "\]"
                           "%22" / "%5C%5B" / "%5C%5D" )

     mid-special     = "(" / ")" / "," / ":" / ";" /
                       "%3C" / "%40" / "%5C%5C"     ; "<" / "@" / "\\"

     mid-atext       = ALPHA / DIGIT /              ; RFC 2822 <atext>
                       "!" / "$" / "&" / "'" /      ; allowed sub-delims
                       "*" / "+" / "=" /            ; allowed sub-delims
                       "-" / "_" / "~" /            ; allowed unreserved
                       "%23" / "%25" / "%2F" /      ; "#" / "%" / "/"
                       "%3F" / "%5E" / "%60" /      ; "?" / "^" / "`"
                       "%7B" / "%7C" / "%7D"        ; "{" / "|" / "}"

     authority       = <see RFC 3986 Section 3.2>
     host            = <see RFC 3986 Section 3.2.2>
     pct-encoded     = <see RFC 3986 Section 2.1>
     port            = <see RFC 3986 Section 3.2.3>
     sub-delims      = <see RFC 3986 Section 2.2>
     unreserved      = <see RFC 3986 Section 2.3>
     userinfo        = <see RFC 3986 Section 3.2.1>

     message-id      = <see RFC 3977 Section 9.8>
     UTF8-non-ascii  = <see RFC 3977 Section 9.8>
     wildmat         = <see RFC 3977 Section 4.1>
     wildmat-exact   = <see RFC 3977 Section 4.1>
     wildmat-pattern = <see RFC 3977 Section 4.1>

     ALPHA           = <see RFC 5234 Appendix B.1>
     DIGIT           = <see RFC 5234 Appendix B.1>

     atext           = <see RFC 2822 5322 Section 3.2.4> 3.2.3>
     dot-atom-text   = <see RFC 2822 5322 Section 3.2.4> 3.2.3>

     article-locator = <see RFC 5536 Section 3.2.14>
     mdtext          = <see RFC 5536 Section 3.1.3>
     mqtext          = <see RFC 5536 Section 3.1.3>
     msg-id-core     = <see RFC 5536 Section 3.1.3>
     newsgroup-name  = <see RFC 5536 Section 3.1.4>
     no-fold-literal = <see RFC 5536 Section 3.1.3>
     no-fold-quote   = <see RFC 5536 Section 3.1.3>
     xref            = <see RFC 5536 Section 3.2.14>

Appendix B.  Detailed Example

   Here is an example of a mail to the <mailto:tools.discuss@ietf.org>
   list with "Message-ID" <p0624081dc30b8699bf9b@[10.20.30.108]>.

   <http://dir.gmane.org/gmane.ietf.tools> is one of the various list
   archives; it converts mail into Netnews articles.  The header of this
   article contains the following fields (among others):

          Message-ID: <p0624081dc30b8699bf9b@[10.20.30.108]>
          Xref: news.gmane.org gmane.ietf.tools:742
          Archived-At: <http://permalink.gmane.org/gmane.ietf.tools/742>

   The "Xref" roughly indicates the 742nd article in newsgroup
   <news://news.gmane.org/gmane.ietf.tools> on this server.  An 'nntp'
   URL might be <nntp://news.gmane.org/gmane.ietf.tools/742>.  For
   details about the "Archived-At" URL, see [RFC5064].

   The list software and list subscribers reading the list elsewhere
   can't predict a server-specific article number 742 in this archive.
   If they know this server, they can however guess the corresponding
   <news://news.gmane.org/p0624081dc30b8699bf9b@%5B10.20.30.108%5D> URL.

   In theory, the list software could use the guessed 'news' URL in an
   "Archived-At" header field, but if a list tries this, it would likely
   use <http://mid.gmane.org/p0624081dc30b8699bf9b@%5B10.20.30.108%5D>.

   Using domain literals in a "Message-ID" could cause collisions.  A
   collision might force the mail2news gateway in this example to invent
   a new "Message-ID", and an attempt to guess the future URL on this
   server would then fail.

Author's Address

   Frank Ellermann
   xyzzy
   Hamburg, Germany

   EMail: hmdmhdfmhdjmzdtjmzdtzktdkztdjz@gmail.com
   URI:   http://purl.net/xyzzy/