Internet Draft                                         Lou Engineering Task Force (IETF)                         L. Berger (LabN)
Updates: 3209                     Dimitri Papadimitriou (Alcatel Lucent)
Request for Comments: 5710                                          LabN
Category: Standards Track                               D. Papadimitriou
ISSN: 2070-1721                                           Alcatel Lucent
                                                             JP. Vasseur (Cisco)
Expiration Date: March 23,
                                                                   Cisco
                                                            January 2010

                                                      September 23, 2009

         PathErr Message Triggered MPLS and GMPLS LSP Reroute

                draft-ietf-mpls-gmpls-lsp-reroute-06.txt

Status of this Memo

   This Internet-Draft is submitted to IETF in full conformance with the
   provisions of BCP 78 and BCP 79.

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/1id-abstracts.html

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

   This Internet-Draft will expire on March 23, 2010.

Copyright and License Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents in effect on the date of
   publication of this document (http://trustee.ietf.org/license-info).
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document. Reroutes

Abstract

   This document describes how Resource ReserVation Protocol (RSVP)
   PathErr Messages messages may be used to trigger rerouting of Multi-Protocol
   Label Switching (MPLS) and Generalized MPLS (GMPLS) point-to-point
   Traffic Engineering (TE) Label Switched Paths (LSPs) without first
   removing LSP state or resources.  Such LSP rerouting may be desirable
   in a number of cases cases, including, for example, soft-preemption and
   graceful shutdown.  This document describes the usage of existing
   Standards Track mechanisms to support LSP rerouting.  In this case,
   it relies on mechanisms already defined as part of RSVP-TE and simply
   describes a sequence of actions to be executed.  While existing
   protocol definition definitions can be used to support reroute applications,
   this document also defines a new reroute-specific error code to allow for
   the future definition also defines a new reroute-specific error code to allow
   for the future definition of reroute-application-specific error
   values.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc5710.

Copyright Notice

   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of reroute application-specific error values.
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

    1

   1. Introduction  ...........................................   3
    1.1 ....................................................3
      1.1. Conventions used Used in this document  ......................   4
    2 This Document ..........................4
   2. Reroute Requests  .......................................   4
    2.1 ................................................4
      2.1. Processing at Requesting Node  ..........................   4
    2.1.1 ..............................4
           2.1.1. Reroute Request Timeouts  ...............................   5
    2.2 ............................5
      2.2. Processing at Upstream Node  ............................   6
    2.3 ................................6
      2.3. Processing at Ingress  ..................................   6
    3 ......................................6
   3. Example Reroute Requests  ...............................   7
    3.1 ........................................7
      3.1. Node Reroute Request  ...................................   7
    3.2 .......................................7
      3.2. Interface Reroute Request  ..............................   7
    3.3 ..................................7
      3.3. Component Reroute Request  ..............................   8
    3.4 ..................................8
      3.4. Label Reroute Request  ..................................   9
    4 ......................................9
   4. IANA Considerations  ....................................   9
    5 .............................................9
   5. Security Considerations  ................................  10
    6 ........................................10
   6. References  .............................................  10
    6.1 .....................................................10
      6.1. Normative References  ...................................  10
    6.2 ......................................10
      6.2. Informative References  .................................  11
    7 ....................................11
   7. Acknowledgments  ........................................  12
    8      Authors' Addresses  .....................................  12 ................................................11

1.  Introduction

   The Resource ReserVation Protocol (RSVP), see [RFC2205], has been
   extended to support the control of Traffic Engineering (TE) Label
   Switched Paths (LSPs) for both Multi-Protocol Label Switching (MPLS)
   and Generalized MPLS (GMPLS) in, respectively, [RFC3209] and
   [RFC3473].  In all cases, a PathErr message is used to report errors
   to nodes upstream of the error detecting error-detecting node.  As defined in
   [RFC2205],
   [RFC2205] and left unmodified by [RFC3209], PathErr messages "do not
   change path state in the nodes through which they pass".
   Notwithstanding this definition, PathErr messages are most commonly
   used to report errors during LSP establishment, i.e., the RSVP-TE
   processing that occurs prior to the ingress receiving a Resv message.
   (See [PATHERR] [RFC5711] for a broader discussion on PathErr message handling.)
   Support for such usage was enhanced via the introduction of the
   Path_State_Removed flag in [RFC3473], which enables a processing node
   to free related LSP state and resources.  The usage of PathErr
   messages during LSP establishment was further covered in [RFC4920] [RFC4920],
   which describes in detail how a node may indicate that the node it or one of
   its associated resources should be avoided, i.e., routed around,
   during LSP establishment.

   PathErr messages can also be used to support a number of other cases
   that can occur after an LSP is established.  This document focuses on
   the cases where PathErr messages can be used for a node to indicate
   that it desires an upstream node to reroute an LSP around the
   indicating node or a resources associated with the indicating node.
   Some examples of such cases are soft-preemption and graceful
   shutdown.  (See [PREEMPTION] shutdown
   (see [RFC5712] and [GRACEFUL]).

   This document uses the terminology "reroute request" to refer to the
   indication by a node that an upstream reroute should take place.
   This document describes how a node can initiate a reroute request
   without disrupting LSP data traffic or, when so desired, with the
   disruption of data traffic and removal of LSP associated LSP-associated state and
   resources.  The applicability of this document is limited to point-to-point point-
   to-point LSPs.  Support for point-to-multipoint LSPs are for further
   study.

   The mechanisms used to indicate reroute requests are derived from the
   mechanisms described in [RFC4920], [RFC4920] and the error codes defined in
   [RFC4736].  This document describes (1) how a non-disruptive reroute
   request may be issued and, (2) based on an optional "timeout" period,
   how rerouting may be forced by removing LSP state and associated
   resources and signaling such removal.  While this document describes
   how existing protocol definitions can be used to support rerouting,
   it also defines a new reroute-specific error code to allow for the
   future definition of reroute application-specific reroute-application-specific error values.

1.1.  Conventions used Used in this document This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.  Reroute Requests

   This section describes how a downstream node can indicate that it
   desires a node upstream (along the LSP path) to initiate the
   rerouting of an LSP, and how the upstream nodes can respond to such a
   request.  Initiating nodes, transit nodes, and ingress nodes are
   described separately.

2.1.  Processing at Requesting Node

   When a transit or egress node desires to request the rerouting of an
   established LSP, it first determines if it can act on the reroute
   request locally.  Such a check MUST be performed on the condition
   that the Explicit Route Object (ERO), see [RFC3209], received in the
   LSP's incoming Path message does not preclude LSP rerouting.
   Examples of
   events requests that may trigger reroutes are avoiding an
   outgoing interface, a component, label resource, or a next hop not
   explicitly listed in the ERO.  In all cases, the actual repair action
   SHOULD be performed after verification that the local policy allows
   local repair for that LSP/state.  That is, any traffic rerouting traffic-rerouting
   action (associated to this state) must be initiated and completed
   only as allowed by local node policy.

   When the node cannot act locally, it MUST issue a PathErr message
   indicating its inability to perform local rerouting.  The PathErr
   message MUST contain an ERROR_SPEC object of the format defined in
   [RFC2205] or [RFC3473].  Such a message MUST include one of the
   following combinations of error codes and error values:

      1. "Notify/Local node maintenance required" to support backwards
         compatibility and to reroute around the local node.

      2. "Notify/Local link maintenance required" to support backwards
         compatibility and to reroute around a local interface.

      3. "Reroute/<any Reroute error value>" for future compatibility
         and when backwards compatibility is not a concern.

   The rest of the ERROR_SPEC object is constructed based on the local
   rerouting decision and the resource that is to be avoided by an
   upstream node.  It is important to note that the address and TLVs
   carried by the ERROR_SPEC object identify the resource to be avoided
   and not the error code and value.

   When the reroute decision redirects traffic around the local node,
   the local node MUST be indicated in the ERROR_SPEC object.
   Otherwise, i.e., when the reroute decision does not redirect traffic
   around the local node, the impacted interface MUST be indicated in
   the ERROR_SPEC object and the IF_ID [RFC3473] ERROR_SPEC object
   formats SHOULD be used to indicate the impacted interface.

   The IF_ID [RFC3473] ERROR_SPEC object format MUST be used to indicate
   a reroute request that is more specific than an interface.  The TLVs
   defined in [RFC3471], as updated by [RFC3477] and [RFC3477], [RFC4201], and
   [RFC4920] MAY be used to provide specific specific, additional reroute request
   information, e.g., reroute around a specific label.  The principles
   related to ERROR_SPEC object construction construction, defined in section 6.3.1. Section 6.3.1
   of [RFC4920] [RFC4920], SHOULD be followed.

2.1.1.  Reroute Request Timeouts

   Reroute request timeouts are used to remove an LSP when there is no
   response to a reroute request.  A reroute request timeout is used
   when an LSP is to be removed at the expiration of the Reroute reroute request
   timeout period.  When such LSP removal is desired desired, and after
   initiating a reroute request, the initiating node MUST initiate a
   timeout during which it expects to receive a response to the reroute
   request.  Valid responses are a PathTear message or a trigger Path
   message with an ERO ERO, avoiding the resource that was indicated in the
   reroute request.  If either type of message is received, the timeout
   period MUST be canceled and no further action is needed.  Note,
   normal refresh processing is not modified by the introduction of
   reroute request timeouts.  Such processing may result in Path state
   being removed during the timeout period, in which case the timeout
   period MUST also be canceled.

   If the reroute request timeout is reached, the initiating node MUST
   remove the LSP and its associated state and resources.  Removal of
   LSP state is indicated downstream via a corresponding PathTear
   message.  Removal is indicated upstream via a PathErr message with
   the error code of "Service preempted".  The Path_State_Removed flag
   MUST be set if supported.  When the Path_State_Removed flag is not
   supported, a corresponding ResvTear MUST also be sent.

2.2.  Processing at Upstream Node

   When a transit node's policy permits it to support reroute request
   processing and local repair, the node MUST examine incoming PathErr
   messages to see it the node can perform a requested reroute.  A
   reroute request is indicated in a received PathErr message message, which
   carries one of the error code and value combinations listed above in
   Section 2.1.  Note that a conformant implementation MUST check for
   any of the the three combinations listed in Section 2.1.

   A transit node MAY act on a reroute request locally when the ERO
   received in the LSP's incoming Path message does not preclude the
   reroute.  As before, examples include loosely routed LSP next hops.
   When the reroute request can be processed locally, standard standard, local
   repair processing MUST be followed.  The node SHOULD limit the number
   of local repair attempts.  Again, the expected norm is for local
   repair and, thereby,
   repair, and thereby this case case, to be precluded due to policy.

   When the transit node supports [RFC4920], [RFC4920] and is a boundary node node, and
   Boundary rerouting is allowed, it SHOULD use a route request as a
   trigger to reroute the LSP.  (Per [RFC4920], the Flags field of the
   LSP_ATTRIBUTES object of the initial Path message indicate indicates "Boundary
   rerouting".)  In the case the node triggers rerouting, it first MUST
   identify an alternate path within the domain.  When such a path is
   available, the node MUST terminate the PathErr message and issue a
   Path message reflecting the identified alternate path.  Processing
   then continues per [RFC4920].  When an alternate path is not
   available, the node cannot act on the reroute request.

   When a transit node node cannot act on a reroute request locally, per
   standard processing, it MUST propagate the received PathErr message
   to the previous hop.

2.3.  Processing at Ingress

   When reroute processing is supported, an ingress node MUST check
   received PathErr messages to identify them as indicating reroute
   requests.  A reroute request is indicated in a received PathErr
   message
   message, which carries one of the error code and value combinations
   listed above in Section 2.1.  Note that a conformant implementation
   MUST check for any of the the three combinations listed in Section 2.1.

   Upon receiving a reroute request, the ingress MUST attempt to
   identify an alternate path, avoiding the node, interface, resource,
   etc. identified within the ERROR_SPEC object.  When an alternate path
   cannot be identified identified, the reroute request MUST be discarded.  When an
   alternate path is identified, a corresponding make-before-break LSP
   SHOULD be initiated, initiated and standard make-before-break procedures MUST be
   followed.

3.  Example Reroute Requests

   This section provides example reroute requests.  This section is
   informative rather than prescriptive.  Reroute requests are always
   sent via PathErr messages.  As described above, a PathErr message may
   contain either an [RFC2205] format ERROR_SPEC object, or an IF_ID
   [RFC3473] format ERROR_SPEC object and object; it is the address and TLVs
   carried by the ERROR_SPEC object object, and not the error value value, that
   indicates the resource that is to be avoided by the reroute.

3.1.  Node Reroute Request

   To indicate that the node should be avoided by an upstream node, the
   node originating the reroute may format the ERROR_SPEC per [RFC2205],
   for example:

      o    IPv4 ERROR_SPEC object: Class = 6, C-Type = 1

      +-------------+-------------+-------------+-------------+
      |            IPv4 Error Node Address (4 bytes)          |
      +-------------+-------------+-------------+-------------+
      |    Flags    |  Error Code |        Error Value        |
      +-------------+-------------+-------------+-------------+

   The node address is set to the local node's TE router address.  Error
   code is set to either "Notify/Local node maintenance required" or
   "Reroute/<any Reroute error value>".

3.2.  Interface Reroute Request

   To indicate that a numbered interface should be avoided by an
   upstream node, the node originating the reroute may format the
   ERROR_SPEC per [RFC3473], for example:

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |            Length             | Class-Num (6) | C-Type (3)    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                     IPv4 Error Node Address                   |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Flags     |   Error Code  |          Error Value          |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |              Type (1)         |             Length (8)        |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                            IP Address                         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   The node address is set to the local node's TE router address.  Error
   code is set to either "Notify/Local link maintenance required" or
   "Reroute/<any Reroute error value>".  IP address is set to the TE
   address of the interface to be avoided.

3.3.  Component Reroute Request

   To indicate that an unnumbered component should be avoided by an
   upstream node, the node originating the reroute formats the
   ERROR_SPEC per [RFC4201], for example:

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |            Length             | Class-Num (6) | C-Type (3)    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                     IPv4 Error Node Address                   |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Flags     |   Error Code  |          Error Value          |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |              Type (3)         |             Length (12)       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                           Router ID                           |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                     Interface ID (32 bits)                    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   The node address is set to the local TE address used in the
   advertisement of the bundle associated with the component.  Error
   code is set to either "Notify/Local link maintenance required" or
   "Reroute/<any Reroute error value>".  Router ID is set to the local
   router ID ID, and Interface ID is the identifier assigned to the
   component link by the local node.

3.4.  Label Reroute Request

   To indicate that a label should be avoided by an upstream node, the
   node originating the reroute may format the ERROR_SPEC per [RFC4920],
   for example:

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |            Length             | Class-Num (6) | C-Type (3)    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                     IPv4 Error Node Address                   |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Flags     |   Error Code  |          Error Value          |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |              Type (1)         |             Length (8)        |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                            IP Address                         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |              Type (6)         |             Length (8)        |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                         DOWNSTREAM_LABEL                      |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   The node address is set to the local node's TE router address.  Error
   code is set to either "Notify/Local link maintenance required" or
   "Reroute/<any Reroute error value>".  IP address is set to the TE
   address of the interface which that supports the label to be avoided.
   DOWNSTREAM_LABEL indicates the label to be avoided.

4.  IANA Considerations

   IANA is requested to administer assignment of new assigned values for namespaces defined in this document and
   reviewed in this section.

   Upon approval of this document, the

   IANA will make made the assignment in the "Error Codes and Globally-Defined
   Error Value Sub-Codes" section of the "RSVP Parameters" registry located at
   http://www.iana.org/assignments/rsvp-parameters:

      34* registry:

         34  Reroute                                   [This document]                                [RFC5710]

      This Error Code error code has the following defined Error Value sub-code:

            0 = Generic LSP reroute request

      Reroute error values should be allocated based on the following
      allocation policy as defined in [RFC5226].

            Range         Registration Procedures
            --------      ------------------------
            0-32767       IETF Consensus
            32768-65535   Private Use

      (*) Suggested value.

5.  Security Considerations

   Section

   Sections 9 of [RFC4920] and [RFC4736] should be used as the starting
   point for reviewing the security considerations related to the
   formats and mechanisms discussed in this document.  This document
   introduces a new error code, but this code is functionally equivalent
   to existing semantics, in particular particular, the error code/error value
   combinations of "Notify/Local node maintenance required" and
   "Notify/Local link maintenance required".  As such, this document
   introduces no new security considerations beyond what already applies
   to these existing formats and mechanisms.  Future documents may
   define new error values.  Any values; any considerations specific to those values
   should be discussed in the document defining a new value. them.
6.  References

6.1.  Normative References

   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate
                Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2205]    Braden, R., Ed., Zhang, L., Berson, S., Herzog, S. S., and
                S. Jamin, "Resource ReSerVation Protocol (RSVP) --
                Version 1, 1 Functional Specification", RFC 2205, September
                1997.

   [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
             Requirement Levels," RFC 2119.

   [RFC3209]    Awduche, D., Berger, L., Gan, D., Li, T., Srinivasan, V.
                V., and G. Swallow, "RSVP-TE: Extensions to RSVP for LSP
                Tunnels", RFC 3209, December 2001.

   [RFC3471]    Berger, L., Editor, Ed., "Generalized Multi-Protocol Label
                Switching (GMPLS) Signaling Functional Description", RFC
                3471, January 2003.

   [RFC3473]    Berger, L., Editor, Ed., "Generalized Multi-Protocol Label
                Switching (GMPLS) Signaling - Resource ReserVation
                Protocol-Traffic Engineering (RSVP-TE) Extensions", RFC
                3473, January 2003.

   [RFC3477]    Kompella, K., K. and Y. Rekhter, Y., "Signalling Unnumbered
                Links in Resource ReSerVation Protocol - Traffic
                Engineering (RSVP-TE)", RFC 3477, January 2003.

   [RFC4201]    Kompella, K., Rekhter, Y., and L. Berger, L., "Link Bundling
                in MPLS Traffic Engineering (TE)", RFC 4201, October
                2005.

   [RFC4920]    Farrel, A., Ed., Satyanarayana, A., Iwata, A., Fujita,
                N., and G. Ash, "Crankback Signaling Extensions for MPLS
                and GMPLS RSVP-TE", RFC 4920, July 2007.

   [RFC5226]    Narten, T., T. and H. Alvestrand, H., "Guidelines for Writing an
                IANA Considerations Section in RFCs", BCP 26, RFC 5226,
                May 2008.

6.2.  Informative References

   [RFC4736]    Vasseur, JP., et al, Ed., Ikejiri, Y., and R. Zhang,
                "Reoptimization of Multiprotocol Label Switching (MPLS)
                Traffic Engineering (TE) Loosely Routed Label Switched
                Path (LSP)", RFC 4736, November 2006.

   [GRACEFUL]   Ali, Z., et al., Vasseur, JP., Zamfir, A., and J. Newton,
                "Graceful Shutdown in MPLS and Generalized MPLS Traffic
                Engineering Networks",
              draft-ietf-ccamp-mpls-graceful-shutdown-10.txt, Work in Progress, March September 2009.

   [PATHERR]

   [RFC5711]    Vasseur, JP., Ed. Ed., Swallow, G., and I. Minei, "Node behavior
                Behavior upon originating Originating and
             receiving Receiving Resource ReserVation
                Reservation Protocol (RSVP) Path Error message", draft-ietf-mpls-3209-patherr-05.txt,
             Work in Progress, July 2009.

   [PREEMPTION] Messages", RFC
                5711, January 2010.

   [RFC5712]    Meyer, M., Ed. and JP. Vasseur, Ed., "MPLS Traffic
                Engineering Soft Preemption", draft-ietf-mpls-soft-preemption-18.txt,
                Work in Progress, July 2009. RFC 5712, January 2010.

7.  Acknowledgments

   This document was conceived along with Matthew Meyer.  George Swallow
   provided valuable feedback.  The General Area Review Team (Gen-ART)
   review was performed by Francis Dupont.

8.

Authors' Addresses

   Lou Berger
   LabN Consulting, L.L.C.
   Phone: +1-301-468-9228
   Email:
   EMail: lberger@labn.net

   Dimitri Papadimitriou
   Alcatel Lucent
   Francis Wellesplein 1,
   B-2018 Antwerpen, Belgium
   Phone: +32 3 240-8491
   Email:
   EMail: Dimitri.Papadimitriou@alcatel-lucent.be

   JP Vasseur
   Cisco Systems, Inc
   11, Rue Camille Desmoulins
   L'Atlantis
   92782 Issy Les Moulineaux
   France
   Email:
   EMail: jpv@cisco.com

Generated on: Wed Sep 23 18:34:46 EDT 2009